By this way, you can easily format an external hard drive for Mac and Windows.I will explain to you just the basics how storage drives operate in regards to different operating systems, formatting and partitions, especially sharing data with Windows PC's which is the most common asked about issue.To create multiple partitions on a USB flash drive, use these steps: Open Start. As to size for each partition, it depends on your own demands. Alternatively, you can create 2 partitions on the external hard drive: one is for Mac, and the other is for Windows. Solution 3: Create One HFS+ Partition for Mac and One NTFS Partition for Windows.You are now back to having two partitions. Plug the drive into a Mac, fire up Disk Utility, click on the USB drive, select partition tab, select the xxx partition and press the 'delete' key. Plug the drive into the windows machine and agree to it formatting the drive (200 MB only for some reason) and label it something odd (I use xxx) 3. Right-click the Unallocated space, and.
Format Flash Drive Two Partitions One And One Windows Download From MicrosoftIt can be MBR or GUID.Partition - is a space on the drive that appears as another volume, but still resides on the same piece of physical hardware.Formatting - is how a entire drive or partition is structured to hold data, one drive can be partitioned into many separate partitions each with their own formatting. There is only one partition map on the drive. (most compatibility)Take it to the oldest Windows PC your going to share data with, usually XP, right click on it's icon and select format:ExFAT - for large video/movie files use +4GB (pre-10.6.5 Mac's can't read this format, use FAT32)FAT(32) - for most anything, small use (under 4GB sized files), thumb drives, most compatibility with connecting to TV's consoles and other devicesIf your Windows XP machine doesn't have exFAT, there is a free download from Microsoft.#3 Format a drive or USB thumb drive etc., to work with Mac or PC, on a Mac (most compatibility)Take the drive to the oldest OS X version on the Mac(s), Open Disk Utility and select the drive makers name and size on the far left, thenFormat: MSDOS (FAT32) - for under 4GB files and to work work with consoles, devices that need firmware etc., or(Format: exFAT - for over 4GB sized files (Mac's pre OS X 10.6.5 won't have exFAT))Note: Reports of issues that exFAT formatting on a Mac doesn't work well with Windows PC's, use the oldest Windows version instead.#4 Format a drive or USB thumb drive etc., to work with only between recent Mac 10.6.5+ & Vista-Win 7, on a MacOpen Disk Utility and select the drive makers name and size on the far left, thenFormat: MSDOS (FAT32) for under 4GB sized files, orFormat: exFAT - for +4GB sized files (exFAT is proprietary, patent pending, may have to pay later)Partition Map or Table - is instructions written at the beginning of the drive that tell the hardware it's running from: what, how many, and where the partitions are on the drive. That is a compatible file system which runs on both Windows and macOS (even some of the later OSX versions.Remember to always: "Safely remove hardware" before physically disconnecting from a PCAnd also to drag the drive to the Trash Can/Eject before physically disconnecting on the Mac.Whenever you changing the drive, there is the potential for the lost of data.So make sure you have a copy of the data off the drive your attempting to change and physically disconnect all other non-essential drives so no mistakes occur.#1 If you want to format a drive, USB Thumb drive etc., to only work with a recent Mac and to boot OS X withOpen Disk Utility and select the drive makers name and size on the far left, then Partition: Options: GUID partition table and Format: OS X Extended (Journaled) name it and click Apply.#2 Format a drive, USB thumb drive etc., to work with Mac or a PC, on a PC. Select the file system type as exFAT when you perform the format.It's hassle, you'll have to pay and have it updated like any other software. Check the data was transferred and is accurate before changing the drive format and thus erasing it.There is third party software than can be installed enable read/write of the NTFS format on Mac's, you'll need to search online for it. (please read further on about the differences between FAT and exFAT)Recent Mac's can read NTFS, but not write to it, so this might be enough to transfer data off, then reformat the drive. What do I do?It's likely formatted NTFS by Windows, it's best to take it back to the Windows machine, remove the data and reformat it FAT32 or exFAT, then place the data back on.It's technically correct, but Windows doesn't like it when the block size is larger than 1024 KB. (exFAT or MSDOS) and click apply.If it still doesn't work, format the drive on the PC.OS X appears to be using too big of a block size. MSDOS is what Apple calls FAT32.I formatted the external drive exFAT or FAT32 (MSDOS) on my Mac and took it to a PC and it asks me to format!Don't format it (unless your willing to erase all the data on it)Take the drive back to the Mac and copy off the data (if you don't have a copy on the Mac already) and try formatting it again, this time making sure to select the Option: MBR then chose the format. Windows needs MacDrive to access this Apple HFS+ drive format.There is no choice for MSDOS format on the PC, or FAT32 on the Mac, what do I choose?FAT32, if it just says FAT, it usually means FAT32 (as FAT16 is on the way out.). Open Disk Utility in the Applications/Utilities folder and select the drive on the far left with a makers name and size, then click Partition tab: Options: (for a establishing a specific partition map scheme), partitions, and Format (for selecting a specific format for the drive/partitions)How do I format a drive for booting with a Mac?Same steps as above, choose GUID as the Partition map under Options, and OS X Extended journaled (HFS+) as the format for the partition your going to be installing OS X into. How to work psp emulator on macIt's formatted FAT32(MSDOS) which if you go and install Windows 7 via their install methods will change that format to NTFS. When files are deleted it leaves holes and thus the data on the drive isn't all nice and compact all the time to provide all the free space at the bottom of the drive to create the second partition.To fix this requires cloning one's OS X partition to a external drive, hold option boot from it to check it out, erase the OS X partition in Disk Utility (booted on the clone) onto the internal drive OS X partition, then reverse clone the external OS X partition back onto the internal OS X partition.This will effectively write all the data of the OS X partition starting from the top of the partition and working downward, so when you boot off the internal OS X partition you will be able to format your second partition with more of your remaining free space available.Read more about clone/reverse clone here:BootCamp: "This disc can not be partitioned/impossible to move files."Can I have more partitions on my boot/external drive?With OS X, your allowed to create one more partition using Bootcamp on the boot drive. If that partition size is too small to install Windows, then Bootcamp will say it can't continue.Hard drives write data on a drive from the top down where it can find space. It just uses a default in relation to the size of the drive being formatted.I went to format a Bootcamp / second partition on my boot drive and it's restricting my size, I know I have more free space availableYour partitions are stacked like so before creating the second partition.Your partitions are stacked like so after creating the second partition.When you try to create a Bootcamp / Second partition it's started from the bottom free space remaining on the OS X Partition and works it's way up until it hits data written on the drive from OS X. Unfortunately, OS X doesn't give you an option to pick a block size.
0 Comments
Leave a Reply. |
AuthorBenny ArchivesCategories |